manufacturer supply 6al4v GRADE5 titanium alloy sheet 1.0mm for Industrial

Size :Thickness(0.3～6.0mm) Width (400～1000mm) Length(1000～3000mm)
         Thickness(4.7～60.0mm) Width(400～1050mm)Length(1000～3000mm)
         Thickness(0.5～1.0mm) Width(300～1000mm)Length (800～3000mm) for heat charge plate
         State::1.Hot rolling (R),Anneal (M)

                   2.Cold rolling (Y),Anneal (M)
 
Quality Test::Third party testing center is entrusted to conduct physical and chemical performance testing

 

Hot rolling : the process of rolling at temperatures higher than those of recrystallization.
The rolling process in which the plastic deformation temperature of a cold rolling is lower than the recovery temperature.
Annealing: a process in which metals are heated slowly to a certain temperature, held for a sufficient time, and then cooled (usually slowly, sometimes by controlled cooling) at an appropriate rate.
Pickling: to immerse the parts in an aqueous solution of sulfuric acid, etc., so as to remove the oxide and other thin films on the surface of the metal.Is the plating, enamel, rolling process such as pre - or intermediate treatment.