Slitting method for titanium and titanium alloys
Introduction to the slitting of titanium and titanium alloys
The characteristics of titanium and titanium alloy strip winding longitudinal shearing method is that the uncoiling titanium and titanium alloy strip is processed by the process line method: clip feeding - longitudinal shearing - directional parting - platen - separating - winding - winding - unwinding - packaging.
The method of the invention can be used to longitudeshear the titanium and titanium alloy tape coil with a length of up to thousands of meters, cut off the uneven part of the edge of the titanium band, and longitudeshear the wide titanium band into a number of narrow titanium bands of different widths according to user requirements; Also can only cut the edge of the titanium strip, maintain the width of the titanium strip.
How to do metal titanium and titanium alloy slitting?
The characteristics of titanium and titanium alloy strip winding slitting method is that the uncoiling titanium and titanium alloy strip using: clip feeding - slitting - directional parting - platen - winding - winding - unwinding - packaging process line method;
The clamping means that the titanium belt in operation is sent to the longitudinal shearing machine by clamping a pair of rubber roller;
The longitudinal shear means that the titanium belt in operation is longitudinally cut into a number of narrow titanium belts of different widths along the length direction of the titanium belt through a set of disk scissors arranged on a pair of transverse roller.
At the same time, the uneven part of the edge of the titanium belt was removed by the two pairs of the outermost disc shears, and the cut edge wire was wrapped into the edge wire roll by the collection wheel arranged on the side of the disc shears.
Directional dividing means that the narrow titanium strip separated by longitudinal shear enters the platen table neatly with the same gap between adjacent narrow strips through the guide of the dividing disc arranged on a pair of transverse rubber surface rollers.
How to wrap into multiple narrow titanium rolls?
The clamping plate is to guide the narrow titanium strip after the strip to the winding machine through the clamping plate table;
The winding is to cut the titanium strip into different lengths of rolls according to the needs after the transverse shearing machine; Winding means that narrow titanium strips are wrapped into multiple narrow titanium coils on the same winding mandrel through the guidance of a set of directional parting disks arranged above the winding mandrel.
After all the narrow titanium strips are wrapped into coils, the winding trolley supports the titanium coils from below, and the winding machine shrinks the expanding block to loosen the inner coil core of the titanium coils.
The narrow titanium coil is bound and fastened by manual binding tape, and then the narrow titanium coil is connected from the core shaft of the winding machine by rotating the unwinding steering table arranged beside the winding machine, and the unwinding steering table is rotated. The narrow titanium tape roll is transported to the packaging table for wrapping paper and packaging.